Drv::ByteStreamDriverModel Byte Stream Driver Model

The byte stream driver is a generic model for drivers implementing a "stream of bytes" interface. Typically these drivers operate with an outgoing stream and an incoming stream.
The outgoing stream is represented by the input send port; other components can invoke this port to send data through the driver. The incoming stream is represented by the output recv port; the driver will call this port to send data to the component that is receiving data from the driver.

Design

There are two versions for the ByteStreamDriver, a synchronous version (Drv.ByteStreamDriver) and an asynchronous version (Drv.AsyncByteStreamDriver). In the synchronous version, the (guarded) send port blocks and returns status. In the asynchronous version, the (async) send port calls back on the sendReturnOut port to return status and buffer ownership.

Send

The manager component (for example a radio manager) initiates the transfer of send data by calling the "send" port. The caller will provide a Fw::Buffer containing the data to send.

1. Async case: The driver component must perform a callback on its sendReturnOut port to return the status of that send as well as returning ownership of the Fw::Buffer to the caller.
2. Sync case: The driver component must return a status of the send operation and ownership of the Fw::Buffer to the caller.

These responses are an enumeration whose values are described in the following table:

Value	Description	Buffer Ownership
ByteStreamStatus::OP_OK	Send functioned normally.	Ownership of the Fw::Buffer passes to the byte stream driver.
ByteStreamStatus::SEND_RETRY	Send should be retried, but a subsequent send should return OP_OK.	The caller retains ownership of the Fw::Buffer.
ByteStreamStatus::OTHER_ERROR	Send produced an error, future sends likely to fail.	Ownership of the Fw::Buffer passes to the byte stream driver.

Receive

The byte stream driver component initiates the transfer of received data by calling the "recv" output port. This port transfers any read data in a Fw::Buffer along with a status for the receive. This status is an enumeration whose values are described in the following table:

Value	Description
ByteStreamStatus::OP_OK	Receive functioned normally and buffer contains valid data.
ByteStreamStatus::RECV_NO_DATA	Receive worked, but there was no data
ByteStreamStatus::OTHER_ERROR	Receive produced an error and buffer contains no valid data.

The following components implement the byte stream model using the synchronous interface: - Drv::TcpClient: a F´ component wrapper of the tcp client - Drv::TcpServer: a F´ component wrapper of the tcp server - Drv::Udp: a F´ component wrapper of the udp - Drv::LinuxUartDriver

Requirements

Name	Description	Validation
BYTEDRV-001	The ByteStreamDriverModel shall provide the capability to send bytes	inspection
BYTEDRV-002	The ByteStreamDriverModel shall provide the capability to produce bytes	inspection